BSCI实验参考

1,P141中出现的单区域配置OSPF
Berlin> enable
password:TestKing
Berlin# configure terminal
Berlin(config)# router ospf 1
Berlin(config-router)# network 10.60.2.1 0.0.1.255 area 0
Berlin(config-router)# network 10.60.40.1 0.0.0.3 area 0
Berlin(config-router)# network 10.90.20.10 0.0.0.0 area 0
Berlin(config-router)# exit
Berlin(config)# ctrl+z
Berlin# conpy running-config startup-config
*需要注意的是通配符的配置方法*
*配置多区域OSPF和它唯一的区别就是要见机行事的添加命令area x stub以及area x stub no-summary*

2,P218关于eigrp到isis的重分配以及isis到eigrp的重分配
Testking2> en
Testking2# configure terminal
Testking2(config-router)# router isis
Testking2(config-router)# redistribute eigrp 100 level-1 metric 50
Testking2(config-router)# exit
Testking2(config)# router eigrp 100
Testking2(config-router)# redistribute isis level-1 metric 64 10 255 1 1500
Testking2(config-router)# redistribute connected
Testking2(config-router)# ctrl+z
Testking2# copy running-config startup-config

3,P256关于NAT地址转换
TestKingNAT# configure terminal
TestKingNAT(config)# access-list 5 permit 10.100.5.0 0.0.0.255
TestKingNAT(config)# ip nat pool lan 192.168.15.1 192.168.15.1 netmask 255.255.255.0
TestKingNAT(config)# ip nat inside source list 5 pool lan overload
TestKingNAT(config)# ip nat inside source static 10.100.5.5 192.168.15.5
TestKingNAT(config-if)# int s0
TestKingNAT(config-if)# ip nat outside
TestKingNAT(config-if)# int e0
TestKingNAT(config-if)# ip nat inside
TestKingNAT(config-if)# exit
TestKingNAT(config)#exit
TestKingNAT# copy running-config startup-config